Skip to content 
STANDARD ALUMINUM END MILLS
Carbide End Mills for Aluminum
A practical standard range for repeat aluminium machining, with available geometries, flute counts and lengths. Start with the AL700 and AL/AP550 series, then confirm the product form that fits the part and operation.
- Drawing
- Material
- Pre-hole
- Ø & tolerance
- Machine setup
Application input reviewed
Standard route confirmed
Walter grinding & Zoller inspection
Inspection result before release
Technical fit
Start with the aluminium material, part form, operation, diameter and required reach.
Available standard route
Compare the appropriate series, geometry and flute count against current product availability.
Purchase-ready confirmation
Use a defined configuration for quotation, including size, quantity and the production requirement.
Engineering route when needed
If the standard range does not fit the part or setup, move directly to a custom-tool review.
Choose the Standard Series That Fits the Job
AL700
Efficient Aluminium Machining
For repeat aluminium machining when the available geometry, diameter and reach fit the operation.
AL/AP550
General Aluminium & Profile Machining
A general-purpose standard option when the required geometry suits the part and operation.
Product Forms in the Current Aluminum Range
3-Flute End Mill
Ball Nose End Mill
Long-Shank End Mill
2-Flute End Mill
Single-Flute End Mill
Micro End Mill
PRODUCTION AND INSPECTION
From approved aluminum-tool configuration to finished geometry
For repeat aluminum machining, we confirm the selected series, geometry, diameter and reach against the application before production. If the standard range does not fit the part or setup, the drawing and process conditions move to a custom-tool review.
Review the aluminum machining requirement
Workpiece material, operation, required geometry, diameter, reach and machine setup.
Confirm the right production route
Available AL700 / AL/AP550 configuration, or a custom engineering review when the standard range does not fit.
Walter 5-axis grinding — forming the specified flute and tool geometry
Zoller dimensional inspection — verifying the selected tool configuration before release
INSPECTION AND RELEASE
Check the specified geometry before release
During production, applicable dimensions and geometry are checked against the approved tool configuration. Final inspection confirms the tool is released against the defined requirement.
In-process dimensional checks
Check applicable dimensions and geometry during production before the tool is completed.
Final inspection and release
Complete final inspection against the approved configuration before release.
FAQ
Start with the workpiece, operation, required geometry, diameter and reach. AL700 and AL/AP550 are series routes; the right choice is confirmed from the actual available product form and process conditions.
No. Both ranges include 2- and 3-flute variants. Flute count must be checked together with the geometry, size, reach and intended operation.
That is the purpose of this page: identify the closest available standard route for a defined production task. Current size, quantity and lead-time status are confirmed during quotation.
Send the drawing or the relevant process information. SUNDI can review a custom aluminium end mill when the standard geometry, diameter, reach or other application requirement does not fit.
Provide the aluminium material, operation, required diameter, cutting length or reach, holder/spindle conditions, and any finish or process constraints.
Wuxi Sundi Precision Tools Co.,LTD
- +86 18168312921
- +86 18168312921
- +86 18951588639
- info@sundicuttingtools.com
If the listed standard range does not fit the part or machine setup, send the drawing or relevant process information. SUNDI can review a custom aluminium end mill.